Building a WRL, AER, NASA, SCCA, Rally America, or track day BMW E30 or E36?  Save a ton of time during the build by using our pre cut parts.


BMW Chassis Reinforcements - We developed our reinforcements based on our World Racing League E36 328i build. Our take on several other very common designs are available as one all inclusive kit or separately.

  • E30 and E36 Motor Mount Reinforcements - Known cracking issue in the motor mount pocket is addressed to reinforce the motor mounts from pulling free from stress cracks during track days or heavy race use. Welding required.


These parts have been developed during various project builds at Izzy's. The parts were developed and tweaked for best final fitment on in house projects.


Unless noted, parts are shipped flat with pre cut bend lines that are easily formed with a good vise and a 1 lb hammer. Simply prep the weld areas to bare clean metal, hammer form (or use a press brake) and weld up the cut lines once installation is complete.


These are NOT bolt on parts. They will require some fabrication skills and tools to install.


Some trimming of edges may be necessary due to production line variances or prior chassis damage/repair.

Hardware not included. BMW not included. For off-road use only. Don't feed them after midnight. You'll shoot your eye out.

BMW E30 and E36 Motor Mount Reinforcements