top of page

Building a WRL, AER, NASA, SCCA, Rally America, or track day BMW E36?  Save a ton of time during the build by using our pre cut parts.


BMW Chassis Reinforcements - We developed our reinforcements based on our World Racing League E36 328i build. Our take on several other very common designs are available as one all inclusive kit or separately.


  • Front Shock Tower Reinforcement Plates - Reinforces the top of the front shock tower or to replace a tower that's mushroomed. Made from .125 steel. Fabrication required and the stock ribs need to be sliced or beaten flat and then plug welded through the slots in our plate. These may need some tweaking/grinding to fit your application. (shock tower plates only. These do NOT tie into the frame/fender horn)


These parts have been developed during various project builds at Izzy's. The parts were developed and tweaked for best final fitment on in house projects.


Unless noted, parts are shipped flat with pre cut bend lines that are easily formed with a good vise and a 1 lb hammer. Simply prep the weld areas to bare clean metal, hammer form (or use a press brake) and weld up the cut lines once installation is complete.


These are NOT bolt on parts. They will require some fabrication skills and tools to install.


Some trimming of edges may be necessary due to production line variances or prior chassis damage/repair.

Hardware not included. BMW not included. For off-road use only. Don't feed them after midnight. You'll shoot your eye out.

E36 Front Shock Mount Reinforcements

    bottom of page